If you make a purchase through an affiliate link, I may earn a small commission at no extra cost to you.
My Brother CS7000X arrived recently, and I’m so excited to write this Brother CS7000X review!
For years, I sewed with the Brother CS6000i sewing machine and loved it. My biggest complaint with the Brother CS6000i was its unreliable needle threader. Mine broke less than 2 years after owning the machine, and I was stuck threading the sewing machine needle by hand. While that wasn’t a huge hardship, I know I wasn’t the only one who thought that contraption was a bit nitpicky.
When Brother announced one of the main differences between the Brother CS7000i (the model after the CS6000i) and the CS7000X was going to be an improved needle threader, I was excited to try it out.
To be honest, I didn’t think the Brother CS7000i was much of an improvement over the CS6000i, but I do think Brother is heading in the right direction with the CS7000X.
Want to learn more? Read on for my detailed Brother CS7000X sewing machine review.
I’ll walk you through some of its best features, show you how it’s used and what you can do with it, and then discuss some of its limitations. I’ll also cover how it differs from the CS6000i and CS7000i, its two predecessors.
Brother CS7000X Review of Features
|Dimensions||12.2" x 6.7" x 16.3"|
|Stitch Length and Width||5 mm x 7 mm (0.19 x 0.27 inches)|
|Maximum Sewing Speed||750 stitches per min (spm)|
|UL/CSA Listed Voltage||110V|
And yes, the Brother CS7000X only has a max speed of 750 spm. I verified with Brother twice to ensure this was the case and not a typo in their specs.
Seeing as its predecessors, the Brother CS6000i and CS7000i, had a max stitching speed of 850 spm, this is an interesting move on Brother’s part to limit the max speed on their newest machine.
What comes in the box with the Brother CS7000X?
- Sewing machine, power cord, foot controller
- Wide table
- Hard case
- 10 presser feet and quilt guide
- Needle set, including twin needle
- 3 bobbins (according to Brother’s website, but my machine actually included 4)
- Accessories: extra spool pin, seam ripper, screwdriver, cleaning brush, eyelet punch, and L driver
- Operation Manual In English, French, and Spanish plus quick start guide
What’s not included? Basic sewing supplies such as sewing scissors, fabric, thread, extra needles, etc. Check out my guide to essential sewing supplies if you’re looking to get started and don’t know what you may need!
What presser feet are included with the Brother CS7000X sewing and quilting machine?
There are 10 included presser feet with the Brother CS7000X. The same 10 feet are included with the CS7000i, but the 1/4″ quilting foot is an addition to those included with the CS6000i.
These are the included feet and what you can sew with them:
- Zigzag foot: the all-purpose foot you’ll use for most sewing tasks
- Overcasting foot: neaten fabric edges and create seams with an overcasting stitch
- Buttonhole foot: make a buttonhole perfectly sized from a button you place in the back of the foot
- Button sewing foot: hold a button in place while the machine stitches it on
- Zipper foot: sew on zippers
- Blindstitch foot: create blind hems; especially useful for garments
- 1/4″ foot: helpful to create perfect 1/4″ seams, common when quilting or sewing doll clothes
- Monogramming foot: use with decorative stitches; this is NOT an embroidery machine
- Walking foot: sew bulky layers at the same rate; great for quilting, sewing knits and slippery fabric
- Quilting foot: this spring-action foot helps with free-motion quilting
The nifty thing about the Brother CS7000X is if all these feet have you scratching your head or quaking in intimidation, Brother understands and has programmed the CS7000X with helpful hints. When you select a stitch, it will guide you with a letter that corresponds with the presser foot it recommends for that task.
What are the 70 stitches?
Here a picture of the stitches available on the Brother CS7000X. The CS7000i and CS7000X contain identical stitches but with a different number order for the last satin stitches.
With the Brother CS7000X, you get 7 buttonholes and other utility, decorative, heirloom, and quilting stitches.
My favorite decorative stitch is 53, the heart stitch. It’s so cute when stitched on napkin borders or edges of doll clothes and accessories, for instance.
Reviewing Other Features of the CS7000X Sewing Machine
The New CS7000X Needle Threader
I love playing around with sewing machines and evaluating new features. Thus, I was SO excited to get my hands on the new needle threader to see if I could recommend it over the CS6000i and CS7000i needle threaders.
Spoiler alert: It’s not perfect, but it is better than the CS7000i and CS6000i.
There still is a small metal hook on the inside that could bend, but it’s protected by plastic rather than bendable metal on the sides.
I do prefer the less complicated needle threaders on the Brother SE600 or SE1900. Heck, I even prefer the needle threader on my Singer heavy-duty sewing machine.
However, the CS7000X needle threader is an improvement from what it used to be, and I think most users will be satisfied with it. Especially those who don’t have other machines to compare it to.
Dials, Knobs, and Starting to Sew
Since this is a computerized sewing machine, stitch selection is done on the LCD screen. Here, you choose the stitch number and then adjust stitch length and width.
Also, you can check if your presser foot is compatible with that stitch. By reading the manual, you can also learn how to program the machine to stop with the needle up or down as well as change the needle position to left, right, or center.
When it’s time to sew, you use the start/stop button on the front of the machine or the included foot pedal. Reverse stitching is done with the U-shaped button on the front of the machine. You can also use the needle up/down button to adjust your needle to the desired position.
A speed slider also on the front of the sewing machine controls the maximum speed the machine will sew. This is a great feature for heavy-footed sewists or kids learning to sew for the first time!
The tension dial, located right above the workspace, controls the tension on the thread. This is in a new position compared to where it was on the Brother CS6000i and CS7000i.
Wide Table & Its Uses
This is great for quilting, making large costumes, or even stitching curtains or bedding.
The Free Arm and Lack of Accessories Pouch
If you remove the small compartment at the front of the sewing machine, a free arm remains. This helps when sewing circular items such as hems and cuffs. Wrapping tubular items around this prevents you from accidentally stitching the two sides together.
Inside the removable compartment is a small area for accessories storage. My CS6000i came with a small, white accessories pouch that held everything and fit nicely inside of the free arm. This was NOT included with my CS7000X.
I’m scratching my head trying to figure out why Brother would eliminate something that probably cost them less than 5 cents to manufacture and was so helpful. As such, my accessory feet now live in a small plastic baggie inside the compartment. Sad day.
Twin Needle Capability and LED Lights
An extra spool pin is included if you decide you want to sew with a twin needle to make two parallel lines of stitches, which is a common hem finish on professionally-made clothes.
Although a coverstitch machine is used to create the effect in the case of professional garments, you can somewhat mimic the look with your regular sewing machine and a twin needle.
The workspace is also illuminated by dual LED lights. The light is comparable to the Brother CS7000i and CS6000i. While it will be adequate for most users, there will still be some who need extra illumination. Luckily, in this day and time, there are so many options for auxiliary light sources!
Setting Up the Brother CS7000X Sewing and Quilting Machine
Most Brother sewing machines are set up in similar manners. A quick start guide and paper manual are included with the machine, and with the CS7000x, there’s a QR code sticker on the front of the machine to pull up info on your phone or computer.
Threading this Brother sewing machine is easy, and learning to use it is fairly simple as well. Instructions for threading the upper thread and the bobbin are included on the body of the machine, too, if you sew infrequently and forget between sessions.
Brother sewing machines also feature what’s called a “top-drop, quick-set bobbin.” This means you drop the bobbin down into the case and simply wind the thread around guides as directed by the imprinted instructions.
There’s no need to raise the bobbin thread as is the case with most Singer sewing machines that have front-load bobbins. Brother says their bobbins are jam-resistant, but that only applies to the bobbin if threaded and set correctly. I’ve jammed the bobbins on my machines many a time when I’ve made careless set-up mistakes!
Is it easy to sew with for beginners?
I think this is arguably one of the best Brother sewing machines for beginners, and I think most Brother CS7000X reviews will agree.
It comes with directions for threading imprinted on the machine, it has built-in recommendations for the best presser foot to use for your sewing project, and it even has error codes that show up on the LCD screen that help prevent beginner mistakes.
My worst oversight as a beginner was forgetting to put the presser foot down. Seems so simple to remember, but I’d just get so excited to start going that I’d forget. Luckily, my machine would remind me to put the foot down instead of letting me sew and ruin the stitches on that part of my project!
A Few Quick Pros
- Affordable for beginners and budget-minded sewists
- More accessories and features than other sewing machines on the market in this price range
- A decent improvement over its predecessors (CS6000i and CS7000i) – much better needle threader!
- Quieter than its predecessors
Now for the Cons
- 100 spm slower than the CS6000i or CS7000i, its older predecessors?!
- It’s not going to last you forever. Sewing machines are not produced like they used to be!
- Things that are on higher-end sewing machines not found in this machine: automatic thread tension, automatic thread cutter, automatic reverse/reinforcement stitching, knee lifter, and monogramming fonts, for example. (Here’s a list of sewing machines with automatic thread cutting for reference.)
And now for some quick FAQ’s about the Brother CS7000X!
What is the bobbin size for the Brother CS7000X?
The Brother CS7000X sewing machine uses SA156 plastic bobbins. These are 7/16″ bobbins.
While generic bobbins will work, be careful buying non-Brother bobbins. I had issues in the past using generic bobbins (specifically the ones from Hobby Lobby), and I spent too long trying to figure out that problem!
It is nice to have a large bobbin collection, though. Prethreading a handful with your commonly-used thread colors can be a big time saver.
Is the Brother CS7000X good for quilting?
While the Brother CS7000i isn’t a Bernina or other $1000+ sewing machine, you’d be surprised at what it offers for quilters.
Three common quilting feet (1/4″ piecing foot, walking foot, and spring-action quilting foot) are included with purchase along with a quilt guide, which sits in the back of the walking foot to help guide you when sewing parallel lines.
An extendable wide table helps with holding larger quilts, but I often forget I even have my and just use my sewing table to hold bulky projects.
The throat space (area to the right of the needle) is ever so slightly larger than many standard sewing machines, so the added space is helpful when rolling big quilts.
Furthermore, the feed dogs drop easily with a button on the back of the machine, so there’s no need to fiddle with a pesky darning plate to cover them.
Can the Brother CS7000X embroider or monogram?
No, the Brother CS7000X is NOT a computerized embroidery machine.
Thus, you cannot load designs from your computer to your machine to stitch out. If you are interested in free-motion embroidery, though, you can create your own patterns by manipulating your fabric as your machine stitches.
If you’re looking for a combination sewing and embroidery machine, I highly recommend the Brother SE600 or Brother SE625. I started my embroidery journey on the Brother SE625, and it’s a great machine that both sews and embroiders.
In terms of monogramming, this is also NOT a monogramming sewing machine with any built-in fonts.
If you want to add letters to projects, check out the Brother HC1850 or Brother XR9550. Of course, you can use your sewing machine to trace letters you’ve marked on your fabric, but this can be time-consuming and tricky for beginners.
Does the CS7000X act like a serger?
Unfortunately, no the CS7000X is also NOT a serger.
It can, however, create a seam and neaten fabric edges with the use of the overcasting stitch and presser foot.
There is also an extra accessory foot, called the side cutter foot, that is purchased separately and works to trim the fabric as you sew.
This by no means takes the place of a serger, but it works great for trimming and seaming cotton fabric. It is kind of pitiful for knits, especially thin, curly jersey knits, though. (Learn more in my Brother side cutter foot tutorial if this sounds like something you might like!)
Can the Brother CS7000X sew denim jeans, leather, or canvas?
Yes, within reason.
For the occasional sewist of thick fabrics less than 6mm, the Brother CS7000X has you covered. Pick your needle size and type based on the thickness and weave of your fabric, and choose a compatible thread.
Advance slowly over the seam. If you need extra help to jump the seam, use a clearance plate or the locking pin on the presser foot to help you get the bulk under the machine.
And, if you think you’re going to be pushing the limits of your machine, sew slowly or use the handwheel on the right side of the machine to advance the needle by hand.
Now, if you plan to sew thick fabrics regularly, the Brother CS7000X is not the best choice for you.
I own a Singer 4452 heavy-duty sewing machine also (learn more in my Singer 4452 review), and it blows this Brother CS7000X out of the water!
How loud is the Brother CS7000X?
This sewing machine is relatively quiet.
When turned on, the jarring sound as the needle positions itself is quieter than on both my CS6000i as well as my combo embroidery machine. Sewing with it seems to be quieter also.
In comparison, I’d estimate it’s about 1/3 the volume of my serger and heavy-duty sewing machine, too.
What is the Brother warranty?
The Brother CS7000X is covered by Brother’s typical 1/2/25-year limited warranty.
This protects you from all machine defects over the first year of the machine. After the second year, most parts aren’t covered anymore (like the needle threader that broke on my CS6000i.) The electronic parts that are covered for 2 years are also only replaceable if you pay for the labor. The only thing covered for 25 years is the body of the sewing machine.
While this isn’t the most incredible warranty, it is comparable to other sewing machine manufacturers. You can also purchase an extended third-party warranty if you are nervous about the Brother warranty.
Brother CS7000X vs HC1850
|Brother HC1850||Brother CS7000X|
|Automatic Buttonhole Stitches||8||7|
|Automatic needle threading & bobbin winding||Yes||Yes|
When comparing the Brother CS7000X vs Brother HC1850, you’ll find two slightly different machines. The Brother HC1850 boasts 130 stitches and a monogramming font whereas the Brother CS7000X has 70 stitches and no font. The HC1850 also sews at 850 spm max compared to the 750 spm max for the Brother CS7000X.
The CS7000X, however, includes a 1/4″ piecing foot a walking foot not included with the Brother HC1850. The CS7000X also comes with a hard case that you’d have to buy separately on the Brother HC1850.
Both are well-loved Brother sewing machines, though, with similar ease of use! Learn more in my Brother HC1850 review of features.
Brother CS7000X vs CS7000i
However, the max stitching speed is 100 spm slower on the CS7000X.
The same 10 presser feet are included with both machines, and the operation is nearly identical. They also contain the same 70 stitches, although the stitch order differs for numbers 57-69 of the decorative satin stitches.
The CS7000X weighs less and is slightly smaller than the CS7000i, but the stitching is still top-notch and my machine is sturdy while sewing.
Brother CS7000X vs CS6000i
When comparing the Brother CS7000X vs CS6000i, the Brother CS7000X features 10 extra stitches and one extra presser foot (1/4″ piecing foot) not included on the Brother CS6000i.
The CS7000X has also gotten a facelift with a different coloring, a new tension dial location, and a different method of opening the bobbin case.
If you want to purchase the 1/4″ quilting foot to use with the CS6000i sewing machine, here’s a link to this foot. Shh, don’t tell Brother, but I have a generic piecing foot that I got with my set of 42 presser feet, and it also works just fine.
While I have no quantitative data, the Brother CS7000X seems quieter and more stable at high speeds than my Brother CS6000i despite weighing less.
(If you want to learn more, check out my Brother CS6000i review. As I mentioned before, I sewed with this machine for over 5 years!)
So, which is better? The CS7000X, CS7000i, or CS6000i?
If you’ve decided to purchase one of these three machines, congratulations, I think you picked a winner! However, which one is best?
It really depends on what you want.
- Better needle threader non-negotiable? Choose the CS7000X.
- Want a faster sewing machine? Stick with the CS6000i or CS7000i.
- Want a machine that’s been produced for 10+ years and has every YouTube tutorial under the sun available for it? Go with the CS6000i.
- Need those extra 10 stitches or the 1/4″ piecing foot? Consider the CS7000i or CS7000X.
Honestly, if I were choosing a new sewing machine for the first time and didn’t have any specific needs, I’d check the prices, weigh the add-ons of the two newer machines compared to the price, and choose the most value for the money!
Troubleshooting the CS7000X for Beginners
If you’re having problems with your Brother CS7000X and are a beginner, I say this with all the compassion in the world…it may be you and not the machine.
Yes, there are bad machines, but there are also many beginner misconceptions about sewing. I’ve been there, and I’ve experienced so many problems while I was learning that were self-induced.
Here are several things to think about when you first have problems. While not exhaustive, these will get you started troubleshooting.
- Did you thread your sewing machine correctly with the presser foot up and hit all the thread guides? And, is the bobbin wound correctly? Refer to how to thread a Brother sewing machine post for more information. When I first start having problems, unless the issue is painfully obvious, I always stop and rethread first! This solves SO many issues.
- Did you pick the right needle for your sewing project? Knits require a ballpoint or stretch needle, and woven fabrics work well with a universal or sharp. If you’re sewing with the wrong type of needle, mayhem may ensue. Check out my needle sizes and types chart to learn more about how to pick the best needle for your fabric.
- Are you using a good-quality thread, and does its size and type match with your fabric and needle? My go-to is an all-purpose polyester thread, but cotton thread works great when quilting. Metallic threads and other specialty threads are notoriously difficult to sew with.
- Have you adjusted the tension for your machine? I’ve also put together a guide on tension adjustment if you need help.
- Check your needle. If it’s old, remove the needle and toss it. It’s possible it’s dull, nicked, or bent, and that’s why you’re having issues.
Brother CS7000X Review – Conclusion
The Brother CS7000X sewing machine is generally an improvement over its predecessors!
While the decreased max stitching speed is a bummer, the needle threader is better and the look of the machine is improved also. Overall, I’d not hesitate to recommend it to you, whether you’re a beginner or a more experienced sewist.